Surface Treatment
The PearlSurface is a modular UV-C LED device for surface curing and disinfection. The unit is hot-swappable and fully customizable allowing for curing or disinfection for specialized applications.
Protecting Human Health Without the Use of Harmful Chemicals or Materials
pearlsurface
Why use PearlSurface?
AquiSense is passionate about developing solutions that solve real-world problems in water, air, and surface disinfection applications. They do it for people at home, in hospitals, airplanes, and even astronauts.
Eventually, their products will provide reliable, lower cost water to millions in remote communities. AquiSense works with leading UV-C LED manufacturers to evaluate their devices. Using a combination of patented technology and in-depth know-how, they integrate only the best LED devices into their products.
Surface Disinfection
UV-C Curing
Disinfecting surfaces becomes simple with the PearlSurface.
The 3 x 3 inch square PearlSurface modules can be operated individually or assembled into large arrays to fit any application. Each module can be outfitted with a single wavelength and assembled in such a way as to provide multi-wavelength coverage. The PearlSurface eliminates hotspots by homogenizing the LED’s light and giving a uniformed intensity distribution to treated surfaces.
PearlSurface for curing uses UV-C wavelengths between 265 and 310nm. This spectrum allows for specialized curing on the top level sealing the surface of the product.
This application also provides the option of reduced working distance as the UV-C LEDs can be placed at a closer distance than mercury lamps without adding heat to the surface and prevents cracking or drying. Heat is only produced on the back of the LED chip where a heatsink and fans can cool the device.
UV-C Curing
PearlSurface for curing uses UV-C wavelengths between 265 and 310nm. This spectrum allows for specialized curing on the top level sealing the surface of the product.
This application also provides the option of reduced working distance as the UV-C LEDs can be placed at a closer distance than mercury lamps without adding heat to the surface and prevents cracking or drying. Heat is only produced on the back of the LED chip where a heatsink and fans can cool the device.
UV-C Curing
PearlSurface for curing uses UV-C wavelengths between 265 and 310nm. This spectrum allows for specialized curing on the top level sealing the surface of the product.
This application also provides the option of reduced working distance as the UV-C LEDs can be placed at a closer distance than mercury lamps without adding heat to the surface and prevents cracking or drying. Heat is only produced on the back of the LED chip where a heatsink and fans can cool the device.